Description
If you need new all of the remaining disc brake parts to complete your disc brake conversion - see part number ACC-C10-4124 (DISC BRAKE COMPLETER KIT ALL BEETLE & GHIA)
SPECIAL NOTE ABOUT TIE-ROD END SIZES: 66-67 Beetles & Ghia used a tie-rod ends with a smaller sized tapered shaft - 68 & on Cars used a larger diameter tapered shaft. All replacement complete ball-joint beam assemblies and spindles sold by California Import Parts LTD. come with spindles which are designed to be used with the late model tie-rod ends with the large tapered shaft. If you have an original 66-67 Beetle or Ghia - you will need to replace the outer tie-rod ends with the late models style. You will need to check your current tie-rod end for the thread rotation necessary because it is possible to have tie-rods installed in either position leaving it impossible to know which thread type your car has in the outside position. Outer left hand thread use VWC-311-415-812-C. Outer right hand thread use VWC-311-415-811-C.
SPECIAL NOTE ABOUT WHEEL BEARINGS: If installing into 66-67 Beetle or Ghia- please order wheelings for a 1968 and later model. The original 66-67 bearing will not fit. See part numbers VWC-311-405-625-DGR (INNER) & VWC-311-405-645-GR (OUTER)
