Description
With this CSP Products thermostat an oil cooler can be connected directly to the oil filter bracket. The flow-optimized thermostat regulates the oil flow through the cooler and the optimal oil operating temperture is reached much faster.
When the oil is cold, the internal bypass is open. The oil seeks the path of least resistance and in this case flows back into the engine uncooled. From a temperature of 75 degrees Celsius (167 degrees Fahrenheit), the bypass begins to close. From 82 degrees Celsius (180 degrees Fahrenheit), the bypass is closed, allowing the oil to flow completely through the oil cooler.
The oil filter bracket is precisely manufactured from a billet block of aluminum on our CNC milling machines in Bargteheide. The black anodization of the housing protects against environmental influences and the laser-engraved flow directions and connection sizes lightens correct installation. The M8 hole pattern of the mounting holes corresponds to that of usual oil filter brackets, which makes the swap for a CSP Products bracket with thermostat easy.
The oil filter bracket with thermostat has four oil line connection threads to connect engine and cooler. In addition to the four connections for the oil hoses, there are two further connections that are sealed with stainless steel plugs and copper rings from factory. The M14x1.5 thread can be used for an oil temperature sensor if required, while the smaller M10x1 connection can be used for a thermal switch, to control the fan of a Cagero oil cooler for example.
Here are the features at a glance:
- Four connection threads for oil lines 3/8''-NPT
- Oil filter thread 3/4''-16 UNF
- extra large sealing surface for a wide range of oil filters
- One M14x1.5 connection thread with stainless steel plug (e.g. for oil temperature sensors)
- One M10x1 connection thread with stainless steel plug (e.g. for thermal switches)
- Full flow through the radiator from 82° degrees Celsius (180 degrees Fahrenheit)
- The oil reaches its operating temperature significantly faster
- Flow-optimised
- Made from billet aluminum
- Black anodized aluminium housing
- Laser engraved flow direction
- Laser engraved connection sizes
Quality from CSP - Made in Germany
